Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Brea
Roof replacement in Brea runs between $11,400 and $24,800 for a typical 1,600 to 2,600 square foot home, depending on material, pitch, and what we find when the old roof comes off. We know Brea’s hillside tracts and mid-century ranchers because we work on them every week, and we know exactly where the wind hits hardest. That matters when you’re deciding whether to patch or replace. Call (855) 382-0485 and we’ll give you a straight read on what your roof actually needs.
Why Select Roof Repair Is Brea’s Preferred Roof Replacement Company
Our Roof Replacement team has been through enough Brea homes to know the failure patterns before the first shingle comes off. We’re a roofing-only company, which means we don’t split our attention across kitchens, bathrooms, or additions. Noel Carrasco runs our crews with one rule: diagnose before you sell. When a Brea homeowner calls us about a roof that’s losing ridge caps after a Santa Ana event, we don’t automatically quote a full replacement. We climb up, check the uplift zones, and tell you what’s actually happening. Sometimes that’s a targeted repair. Sometimes the underlayment is baked through and replacement is the honest call.
We cover all of Brea – the hillside tracts above Brea Boulevard, the ranches off Imperial Highway, the newer developments in 92823, and everything between. Our customers in Brea value that we stock products from CertainTeed, Owens Corning, IKO, and Atlas, so the material recommendation is based on what works on your roof, not what we happen to have in the yard. We’re licensed and insured, we pull permits on every replacement, and the workmanship warranty is in writing before we start.
Styles & brands we work with
Asphalt Shingle Roof Replacement in Brea
Asphalt Shingle Roof Replacement in Brea is the most common job we do here, largely because so much of the city’s housing stock from the 1980s and 1990s was originally built with three-tab shingles that are now at end-of-life. A standard asphalt shingle replacement on a Brea ranch or two-story tract home runs $11,400 to $18,300 depending on square footage and whether we’re also replacing decking. The job includes tearing off the old material, inspecting the decking, replacing damaged sheets, laying new synthetic underlayment, installing the shingles to the manufacturer’s specified nail pattern, and finishing with new ridge caps, drip edge, and flashing at every penetration.
Architectural Shingles for Wind Exposure
Many Brea homeowners upgrade from three-tab to architectural shingles when they replace. Architectural shingles carry higher wind ratings when installed correctly – the key phrase is when installed correctly. The rating on the wrapper means nothing if the nail count is short. We document every nailing pattern on the permit record and in the final inspection report.
When Decking Replacement Is Part of the Job
On older Brea homes, the original plywood or OSB decking often shows water staining around vents, chimneys, and valleys. If the decking is delaminated or spongy, we replace it. Decking replacement typically adds $65 to $90 per sheet, and we show you the damaged sheets before we swap them out. No surprises.
New Roof Installation in Brea
New Roof Installation in Brea applies two ways: a full replacement on an existing home, or a roof on new construction in one of the city’s developing pockets. For a new roof on an existing Brea home, you’re looking at $13,200 to $24,800 depending on material, pitch, and square footage. For new construction, the range depends entirely on the plans, but we quote from the architect’s drawings so the number is locked before framing starts.
Full Roof Replacement on Existing Homes
When we say full replacement, we mean everything comes off down to the decking. On Brea homes built in the 1970s and earlier, that often reveals felt paper that has turned to dust. We replace it with synthetic underlayment that handles both the dry heat and the occasional intense winter storm. The job includes new flashing at every penetration, new drip edge, and fasteners rated for the wind loads your specific street sees.
New Construction Roofing
For new builds in Brea, we coordinate directly with the general contractor or the homeowner if you’re acting as your own GC. We spec materials based on the structure and exposure, then install to the manufacturer’s published uplift requirements. We pull the permit, schedule the inspection, and make sure the roof passes on the first visit.
Trusted Brands We Service in Brea
We install and service roofs from seven major manufacturers, so when a Brea customer asks for a recommendation, we’re not steering them toward one brand to protect a contract. CertainTeed and Owens Corning architectural shingles hold up well on the city’s windward hillsides. IKO and Atlas offer strong mid-range options for tract homes in the flatter sections of town. Because we keep a full stock of accessories for these brands in our Westminster yard, turnaround on a Brea replacement is fast – typically five to seven working days from tear-off to final inspection, weather permitting.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Brea Homes
- Lifted ridge caps after Santa Ana winds. On a 1980s tract home in the hills above Brea Boulevard, the field tiles looked perfect from the ground, but the ridge caps had lifted and the fasteners had worked loose in the uplift zone. Cheap bids fix what you can see from the street; proper replacement addresses the ridge, hips, and eaves where wind actually fails a roof.
- Sun-baked underlayment on mid-century ranchers. Homes built in the 1960s off Imperial Highway often have original felt underlayment that has baked brittle under decades of inland heat. We’ve pulled concrete tile off ranchers and found underlayment that crumbles in your hand. When that happens, the felt upgrade is non-negotiable.
- Short nailing patterns on old shingle roofs. A 130 mph architectural shingle only earns that rating with the nail count the manufacturer specifies. We regularly see older Brea roofs where nails were skipped or driven high. The shingle looks fine until a 60 mph gust gets under it.
- Water intrusion at flashing points. Brea gets few storms, but when a heavy one hits, the water finds the weak flashing around chimneys, vents, and skylights. Most leaks on Brea roofs trace back to flashing that was never replaced when the last roof went on.
Pricing for Roof Replacement in Brea, CA
Here’s what Brea homeowners can expect to pay as of 2026. Asphalt shingle replacement: $11,400 to $18,300. Architectural shingle upgrade: $13,900 to $21,600. Concrete tile replacement: $18,200 to $27,500. Flat roof replacement with TPO or modified bitumen: $8,400 to $14,700. Decking replacement adds $65 to $90 per sheet. Steep pitches and second-story tear-offs add labor cost. The price we quote is the price you pay – we write fixed, line-item quotes and we don’t change them mid-job unless we both agree in writing. Call (855) 382-0485 to schedule your free estimate, and we’ll give you an exact number for your roof.
We Also Serve Cities Near Brea
Our crews regularly work in Placentia, Rowland Heights, Fullerton, and Yorba Linda, and we know the wind patterns and housing stock in each. If you’re in one of those cities, we’re close by and scheduling is quick. For details on the rest of our service area, see Roof Replacement in Brea or give us a call.
Serving Brea, CA — Our Local Coverage Area
We’re based in the Brea area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Brea
Brea’s building code requires that roofing materials and fastening methods meet the wind speeds mapped for your specific exposure. In practice, the hillside tracts above Brea Boulevard and Carbon Canyon see gusts past 60 mph, which means the installed assembly – not just the shingle rating – has to hold in the uplift zones at ridges, hips, and eaves. A shingle rated for 130 mph only performs to that number if it’s nailed per the manufacturer’s diagram, and we document that nailing pattern on every permit we pull. Call (855) 382-0485 and we’ll check what your specific street requires.
Ridge caps and tile fasteners fail first in high wind because that’s where uplift pressure is strongest. Field tiles toward the middle of the roof plane see less suction, so they often look fine from the ground while the ridge and eaves are compromised. After a Santa Ana event, we inspect the entire perimeter, not just the visible slopes. That’s how we catch problems before they become leaks. Give us a call and we’ll schedule a standalone inspection – no replacement required to get a straight answer.
A compliant quote includes line items for the specific underlayment being installed, the number of fasteners per shingle or tile, upgraded fastening at ridges and eaves, and the permit with inspection. Cheap quotes often leave out the uplift-zone fastening, skip the permit, or quote a lesser underlayment. That’s the difference between a roof that makes it through the next wind season and one that loses ridge caps in October. We write every quote so you can compare line by line. Estimates are free at (855) 382-0485.
Yes. If your roof was replaced with proper fastening and you have the permit, inspection record, and manufacturer documentation on file, an insurance claim after a wind event is much simpler. The adjuster can verify that the roof was installed to code, which supports your position that the damage came from wind, not gradual wear. We give every Brea customer a full documentation packet at the end of the job. If you’re replacing the roof after a claim, call us and we’ll work with your adjuster from the first inspection.
Not always. If the tile itself is intact and the failure is in the underlayment or fasteners, we can sometimes lift the tile, replace the underlayment and fasteners, and reset the same tile. That approach saves material cost. But if the tile is cracked, spalled, or has been patched repeatedly, replacement is the smarter money. We’ll show you the evidence either way. Call (855) 382-0485 to schedule a tile assessment.
Written by Noel Carrasco, Owner at Select Roof Repair, serving Brea homeowners with inspection, repair, and replacement.